The specialist for air conditioning, heating, compressed air and plant technology
aquatherm blue pipe
aquatherm blue pipe made of corrosion-resistant polypropylene is a specialist for the transport of cooling and heating media in closed systems and is therefore particularly suitable for various industrial applications. The physical properties of the plastic are adapted to the special requirements of the heating and cooling sector. It is characterized by its high temperature and pressure resistance. Added to this are the exceptionally good welding properties and the fusion into a homogeneous and materially cohesive unit, so that a maximum of safety and service life is achieved. The system contains – in combination with the aquatherm green pipe fittings – all components for the pipe installation of air conditioning and heating systems as well as for the plant engineering.
Technical specifications
- high temperature-resistance
- high compressive strength
- absolutely corrosion resistant
- Resistance to chemicals
- lower weight than metallic materials
- thinner insulation required compared to metallic pipes
|
aquatherm green pipe
|
aquatherm blue pipe
|
aquatherm lilac pipe
|
|
|
Drinking water application
|
– •
|
||
|
Heating system construction
|
–
|
– •
|
|
|
Air conditioning
|
–
|
– •
|
|
|
Refrigeration
|
–
|
– •
|
|
|
Swimming pool technology
|
– •
|
– •
|
|
|
Chemical transport taking into account the resistance of the material
|
– •
|
– •
|
|
|
Rainwater harvesting
|
–
|
– •
|
|
|
Irrigation
|
–
|
– •
|
– •
|
|
Compressed air systems
|
–
|
– •
|
|
|
Surface heating systems
|
–
|
– •
|
|
|
Use in shipbuilding
|
– •
|
– •
|
|
|
Pre-insulated piping systems for underground installation
|
– •
|
– •
|
|
|
Geothermal
|
–
|
– •
|
|
|
Agriculture
|
– •
|
– •
|
– •
|
we offer in the dimensions 20, 25, 32, 40, 50, 63, 75, 90, 110, 125mm for socket welding and 160, 200, 250, 315, 355, 400 and 450, 500, 560 630mm for butt welding.
Standard Dimension Ratio (SDR) aquatherm blue pipe is available in the following SDR sizes:
- SDR 7.4
- SDR 11
- SDR 17.6
Our material fusiolen®
Decades of experience in the production and application of polypropylene piping systems and the simultaneous endeavour for continuous further development have led to numerous improvements of the aquatherm products.
The basis for this are the innovative polypropylene materials developed and produced by ourselves, which became known as fusiolen® known as fusiolen. Successful results of research & development are fusiolen® PP-R, fusiolen® PR-R FS and fusiolen® PP-RCT.
fusiolen
®
is characterized, among other things, by its special high-heat and extraction stability. Especially the good weldability and the fusion to a homogeneous unit have made the material and the aquatherm polypropylene systems known worldwide. Its physical and chemical properties are adapted to the special requirements of the respective areas of application, such as drinking water, heating and cooling or sprinkler applications.
fusiolen® is an environmentally friendly material that can be recycled and reused in various applications. No environmentally hazardous substances are produced either during processing or during subsequent disposal.
Worldwide, fusiolen® is valued for its durability, chemical purity and low environmental impact.
Fire protection
Guidelines
The following laws, regulations, directives and standards must be considered when planning and executing aquatherm sanitary and heating installations. further information
Fibre composite pipe
By the manufacturing process developed by aquatherm the integration of a special fibre mixture within the material polypropylene is realized.
The result of this innovative technology is the unique direct composite of the material components.
- the linear expansion is reduced by 75 % compared to conventional PP pipes
- the flow rate is increased by 20 % with the same load capacity due to thinner wall thicknesses
- high stability
- the coefficient of linear expansion is almost identical to that of metallic pipelines, so that, compared to all-plastic pipes, support spacing can be increased and fastening clamps can be dispensed with
- optimal price/performance comparison
- lighter in weight
- high impact resistance
- simply cut and weld
Related links
Download area
Article listGermanArticle list valid from 15.02.2022Article listaquatherm grey pipe valid from 28.03.2022EnglishProduct Catalogue valid from 15.02.2022CatalogsGermanaquatherm green pipe Katalog 2022aquatherm blue pipe Katalog 2022aquatherm red pipe Katalog...
Planning and calculation
Planning & Calculation LENGTH EXPANSION CALCULATOR Determine linear expansion in length when using PP-R piping systems to account for changes in pipe length.PRESSURE LOSS CALCULATOR The pressure loss calculator gives the pressure loss and the...